Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Lubes/Cleaners
$8.59
Holy Cow is the latest in the Rock N' Roll Lubrication's line up of chain lubes. Holy Cow is not flammable and is a very settled wet lube that is as clean or cleaner than most dry lubes. Holy Cow preforms fantastic, like the other Rock N' Roll chain lubes. However, being a little bit of a wet-style chain lube, what little dirt or grit that does get on the chain can be wiped away quickly and easily with the chain looking great again. For all you riders that like to ride with a wet lube but could live better without all the dirt and grit of a wet lube, Holy Cow is just for you.
$8.99 - $18.50
Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt.
- For road bikes only
$9.00 - $22.00
Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed.
- All-purpose lube
- Cleans and lubricates simultaneously
$9.00
- 3-In-1 Bio-degreaser, hand cleaner, and stain remover
- 100% Natural, no citrus, palmas or petroleum
$11.95
- 100% Natural and biodegradable, Without animal products
- Apply a small amount, Work in, Then rinse off with water
- Leaves skin clean with a subtle forest scent
$12.99
- Prevents rust, repels water
- Extra heavy duty, nothing finer
- Has achieved the Premium lubricant classification by all major bearing manufacturers worldwide
$13.00
Our Bio-Lube is a lighter lubricant than our Tenacious Oil. Bio-Lube is made using all-natural ingredients and works as a fair-weather lubricant, as well as an all-purpose household lubricant. It is environmentally friendly, non-toxic, and completely biodegradable.
- Bio-Lube is made using all-natural ingredients and works as a fair-weather lubricant, as well as an all-purpose household lubricant
- Bio-Lube is a lighter lubricant than our Tenacious Oil
- Environmentally friendly, non-toxic, and completely biodegradable
$13.00
Our Tenacious Oil is used for ultimate protection and durability for components that have movement with metal-to-metal contact. Our base oil has been produced for us by the same independent California refinery since 1971. The final blending of rust inhibitors and extreme wear additives happens at our facility before the product is bottled and shipped.
- Ultimate protection and durability for metal-metal contact
- Base oil with rust inhibitors and anti-wear additives
$9.95
Park's Anti-Seize Compound reduces friction in threaded and press fit connections for easy assembly and disassembly. It's ideal for bottom brackets, pedal threads, headset cups, seatposts, quill stems and much more. This compound also seals and protects parts from corrosion and rust under the most extreme conditions.
$9.95
Regular lubrication of bicycle chains addresses annoying squeaks and noises, and extends the life of the chain and drivetrain components. Formulated using a proprietary blend of oils, Park Tool CL-1.2 Chain Lube works great in wet or dry conditions. It penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion. Compatible with all bicycle chains. Also works great as general-purpose light lubricant for use on bicycle brake and derailleur cables and housing, spoke nipples, and derailleur and brake pivots.
- 4 fl. oz. (118 mL) bottle
NOTE: Some painted surfaces can be sensitive to oil and grease. Clean off any excess oil or grease immediately. Test first on an inconspicuous area to see if it causes a stain or discoloration.
$9.95
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
$12.95
Park's SuperGrip Carbon Assembly Compound is a combination of grease and tiny particles and is ideal for lubricating, protecting and tightening carbon components, like seatposts, handlebars and stems. SuperGrip solves the problem of carbon parts moving and slipping, which can happen if they are not lubed, or you apply standard grease or lube to them. It also works well with aluminum and steel components.
$13.95
HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components.
-Superior adherence and extended lubrication life
-Extreme temperature range: -20°F to 540°F (-29°C to 282°C)
-Highly water resistant
-Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components
4-ounce (113 g) tube
$17.95
Threadlockers lock threaded assemblies and keep them from loosening.
Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
$17.95
Threadlockers lock threaded assemblies and keep them from loosening.
Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
$17.99
Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts.
Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush.
16-ounce bottle
$19.95
The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.
$19.95
Fills gaps and helps retain non-threaded parts like Press-fit bottom bracket parts, sealed bearings etc.
Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
$28.95
Prepares surface, accelerates curing and promotes maximum performance of Park Tool TLR-1 and TLR-2 Threadlockers as well as RC-1 Retaining Compound.
Notice: Must be used on all component, fastener and carbon fiber surfaces in conjunction with threadlockers and retaining compounds that contact carbon fiber such as PF30 bottom brackets or brackets or bearings pressed into carbon fiber frames. Failure to do so could result in permanently bonded parts.
$28.95
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
$43.95
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings.
The Chain Gang includes:
- CM-5.3 Cyclone Chain Scrubber
- GSC-1 GearClean Brush
- 8 oz. bottle of Bio ChainBrite
The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.
$4.99
Muc-Off Device Cleaner spray bottle contains an advanced pH balanced, eco-friendly cleaning formula that gives a streak-free finish for phones, tablets and laptops. It’s never been easier to keep your devices bacteria-free with the Muc-Off treatment.
- Gives devices a streak-free finish
- Formulated using deionized water and is pH neutral
- Store in a cool dry place
$5.49 - $9.99
- Highly versatile dry weather chain lubricant
- Deep penetrating, durable P.T.F.E. chain lubricant
- Hold up to extreme conditions which can destroy ordinary lubes
- Comfort bottle with pipette system for ease of use and application
$5.49 - $9.99
- Ultra durable, long distance chain lubricant
- Excel in long distance wet or muddy conditions
- It penetrates deep into the chain links core to provide long lasting lubrication and total protection
- Extreme pressure additives coat every part of the link to provide silky smooth gear change and ultra efficient drivetrain
$6.49
The Muc-Off All-Weather Chain Lube is a high-performance synthetic lubricant. The unique water repellent, non-fling formula penetrates deep into the chain link, to create a durable protective coating which guards against corrosion metal-to-metal wear. A unique blend of extreme pressure additives ensures the lube can stand up to even the toughest of rides. Muc-Off's formula provides lubrication for long-distance, on & off-road riding in all conditions.
- Ideal for MTB, Road, Cyclocross and Commuting
- Suitable for use in all weather conditions
- Added protection against contaminants
- Provides smooth and quiet gear shifting
- Reduces friction and improves efficiency
- Derived from renewable sources
- Can be applied to chain, cables, shifters, derailleurs, pedals & cleats
- Pipette system for easy application
- Readily Biodegradable*
- Integral UV tracer dye - aids accurate application to ensure total protection.
*Only contents are readily biodegradable.
$6.49
A proprietary ceramic formulation containing integral Boron Nitride compounds for low friction in dry and dusty conditions. Formulated with our unique eBike specific lubricity pack to handle the higher-torque loads of an eBike drivetrain. Ideal for chains, cables, shifters, derailleurs & pedals.
- Creates a dry ceramic coating for increased durability and dry condition performance
- Contains Boron Nitride compounds
- Ceramic compounds provide ultra-low friction for unparalleled lubrication
- Non-dust attracting - excels in dry and dusty conditions
- Utilizes biodegradable organic compounds
- Ideal for road and off-road
$6.49
A proprietary ceramic formulation containing integral Boron Nitride compounds for low friction in wet and harsh conditions. Formulated with unique eBike specific lubricity pack to handle the higher-torque loads of an eBike drivetrain. Ideal for: Chains, cables, shifters, derailleurs & pedals.
- Specifically designed for the hi-torque loads applied to an eBike chain
- Creates a ceramic coating for incredible durability and long-distance performance
- Contains Boron Nitride compounds
- Ceramic compounds provide ultra-low friction for excellent efficiency
- Waterproof - excels in wet conditions
- Readily biodegradable
- Ideal for road and off-road
- Integral UV tracer dye - aids a
$9.99 - $14.99
- Creates a dry ceramic coating for increased durability and performance in dry condition
- Excels in dry and dusty conditions
- Biodegradable
- Integral UV tracer dye and UV torch to aid accurate application and ensure total protection
$9.99 - $14.99
- Creates a ceramic coating for incredible durability and long distance performance
- Provides ultra low friction for ultimate drivetrain efficiency
- Waterproof qualities excelling in wet conditions
- 95% biodegradable
$9.99 - $17.99
- Frees seized parts
- Disperses moisture to prevent rust and corrosion
- Provides light lubrication for moving parts
- Reduces metal-to-metal contact
- Prevents dirt adhesion
- Cuts down on friction to improve component efficiency