Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Electronics

SRAM eTAP Battery Charger
$45.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap
K-Edge Adjustable Garmin Stem Mount
$39.99
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.
K-Edge Garmin Mount
$49.99 - $54.99
This is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that the replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars. - New clamp design is hinged for ease of installation. - Supported Computers – Most Garmin Edge, Forerunner, and Touring models, including the new Garmin Edge 520, Edge 20 and Edge 25 models (Edge 1000 - fits on the longer XL mount) - Combo Compatible – versions available that support GoPro style interface action cameras and lights - Weight – (31.8 mm) Standard Mount 45.4 grams; Combo Mount 55.4 grams Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *TheNEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
K-Edge Gravity Top Cap Mount
$26.99
The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
K-Edge NiteRider Adapter
$19.99
This NiteRider Adapter is sold separately from K-EDGE “Combo Mount." - Precision Machined 6061-T6 Aluminum - Anodized Gunmetal - Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface - Enables compatibility with K-Edge GoBig Mounts and Combo Mounts - 2x M4 Mounting bolts with Nylok included - Compatible with Lumina Series, Mako Series - Weight: 11.5 grams
Garmin Edge 530
$299.99
Performance GPS Cycling Computer with Mapping - Dynamic performance monitoring provides insights on your VO2 max, recovery, training load focus, heat and altitude acclimation, nutrition, hydration and more - Cycling safety features include new bike alarm, group messaging and tracking, incident detection and compatibility with Varia rearview radar and lights so you can see and be seen - Includes routable Garmin Cycle Map with popularity routing — which helps you ride like a local — plus off-course recalculation and back to start; mountain biking model has integrated Trailforks data, including trail difficulty ratings - Customize with free apps, widgets and data fields from the Connect iQ Store - MTB dynamics track jump count, jump distance and hang time as well as Grit, a measure of the ride’s difficulty, and Flow, which tracks the smoothness of your descent so you have a score to beat next time - Battery life: up to 20 hours with GPS; extendable up to 40 hours with the optional Garmin Charge power pack or in battery save mode Who cares that the Edge 530 cycling computer offers dynamic performance monitoring and insights to help you improve? You do. So, whether you’re a podium finisher, Kona qualifier, gravel grinder, straight-shaven, urban pedaler, dirt ball or somewhere in between, Edge 530 is ready to roll as your new riding partner.
Garmin Edge 830
$399.99
Performance GPS Cycling Computer with Mapping and Touchscreen - Dynamic performance monitoring provides insights on your VO2 max, recovery, training load focus, heat and altitude acclimation, nutrition, hydration and more - Cycling safety features include new bike alarm, group messaging and tracking, incident detection and compatibility with Varia rearview radar and lights so you can see and be seen - Includes routable Garmin Cycle Map with popularity routing — which helps you ride like a local — plus on-device route creation, off-course recalculation and back to start; mountain biking model has integrated Trailforks data, including trail difficulty ratings - Customize with free apps, widgets and data fields from the Connect iQ Store - MTB dynamics track jump count, jump distance and hang time as well as Grit, a measure of the ride’s difficulty, and Flow, which tracks the smoothness of your descent so you have a score to beat next time - Battery life: up to 20 hours with GPS; extendable up to 40 hours with the Garmin Charge power pack or in battery save mode Who cares that the Edge 830 touchscreen cycling computer offers dynamic performance monitoring and insights to help you improve? You do. So, whether you’re a podium finisher, Kona qualifier, gravel grinder, straight-shaven, urban pedaler, dirt ball or somewhere in between, Edge 830 is ready to roll as your new riding partner. In The Box - Edge 830 - Flush out-front mount - Standard mount - Tether - USB cable - Documentation
Delta Smartphone Holder XL
$24.99
Instant bike dashboard Perfect for any enthusiast, Delta's bicycle phone mount allows you to securely display your mobile device while riding. Using a built-in lock mechanism, your plus-sized smartphone is secured safely with multiple grip points and bumpers, to prevent shock and reduce vibration on rough terrain. Adjust the angle of display for convenient viewing while riding to easily access navigation, answer that important call or stop for the perfect photo opportunity. Features Securely Displayed - Weatherproof bungee and rubber inserts keep phone secure and protected while Delta's patented cam lock provides added security for your mobile phone on rough terrain. Compatibility - Bicycle mobile phone mount compatible with phones 3.5 inch wide x 0.5 inch depth x 7.8 inch length (up to iPhone 8+ Plus and Samsung Galaxy 9+ plus). Easily Accessible - Sliding system allows for easy in and out while on the go, so your phone is available for an important call, adjusting navigation, and you'll never have to miss the perfect photo opportunity. Quality Construction - Designed for road cycling, your mobile phone is fully enclosed and securely mounted in place with a built-in locking mechanism. Precision-engineered design grips your device, providing ease-of-mind on the roughest terrain. Multiple Mounting Options - Included handlebar and stem cap mounts allow you to position your mobile phone in your desired location. Securely mounts to handlebar diameters up to 1 3/8" / 35 mm Weight - 0.17 lbs / 80 grams
CatEye Quick
$64.95
Wireless, weather-proof, and easy to read, the sleekly designed Quick cyclocomputer with integrated Out-Front bracket measures your speed and distance to give you the edge on your daily commute and beyond. Winner of Good Design Award 2018 and iF Design Award 2019. Functions - Current / average / maximum speed - Trip distance - Total distance - Moving time - Clock Features - Analog wireless - Easy-to-read inverted LCD - Auto start / stop - Menu screen to change setting - Programmable odometer - Battery indicator - Sleek design with integrated Out-Front bracket (head unit is removable from the bracket)
Bryton Rider 450E
$199.95
Rider 450 is a powerful GPS Cycling Computer. On top of all the features of the Rider 410, Rider 450 comes pre-loaded with OpenStreetMaps, providing useful location info while cycling. With Full GNSS support, it can record your ride precisely no matter where you are riding, and it's Follow Track and WLAN Data Sync features will make you love it even more! Reign over Peaks - Designed for mountain bike lovers, Rider 450 preloads OpenStreetMap with Full GNSS support, allowing you to find trails, locate yourself and know which way to go in a second. Bigger Display, Better View - Designed for your better viewing experience, Rider 450 is built with crisp black and white 2.3” large display, making reading data become easier than ever. It can fit up to 10 data per page for you to have better understanding of your real-time performance. Follow Track with OSM - With OpenStreetMap(OSM), Rider 450 provides a convenient and intuitive user experience for mountain bikers. You can find the trails, locate where you are and which direction you should go at a glance, making the rides smoother and more enjoyable. ESS Support - Rider 450 supports electronic gear-shifting systems including Shimano’s Di2, SRAM’s eTap and Campagnolo’s EPS. Gear information, such as gear ratio, gear combo and even battery life, are displayed immediately on the Rider 450, eliminating the need to manually check the crankset and cassette. ANT+/ BLE Sensors Support - Aiming for the most convenience, both ANT+ and BLE sensors work perfectly with Rider 450 after simple pairing. Absolute Precision - Bryton's first GPS cycling computer with GNSS full support incorporates GPS, Glonass (Russia), BDS (China), Galileo (Europe) and QZSS (Japan) satellite systems, providing a much more reliable satellite coverage in any situation especially when there are buildings/trees or even while mountain biking, along with faster start-up. Supports up to 78+ Functions - Rider 450 provides rich data for you to fully grasp the performance of your ride. It incorporates up to 78+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power, HR and Di2. 32 Hours of Battery Life - If you love going on adventures whole day, Rider 450 certainly meets your needs. It provides up to 32 hours of battery life and allows you to charge via power bank while recording. TrainingPeaks Workout - To make training easier than ever, Rider 450 now supports workout plans from TrainingPeaks. Workouts can be planned on TrainingPeaks® and exported to the Rider 450 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals. Smart Notifications - Never worry about missing important phone calls, emails or texts during rides again! Rider 450 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones. Customizable Data Display via App Tailor your own data display with Bryton Active App! After pairing with Bryton Active App, you can customize your data fields/pages based on your training goals via BLE on your phone. It's super easy to use. Sync to Bryton Active App - Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and plan workouts, downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App’s STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions. STRAVA, TrainingPeaks and Selfloops: Auto Sync - Compete with worldwide riders through Rider 450 recorded data.Workout files are automatically saved in FIT format, which can then be uploaded to popular training sites. It is also super easy to sync activities from the Bryton Active App to Strava/TrainingPeaks/Selfloops by pairing accounts. What's even better is the Rider 450 supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis. Specifications: - Display: 2.3 inches Mono LCD - Battery Hour: 32 Hours - GPS: High-Sensitivity Chipset - Waterproof: IPX7 - Alerts: Yes - Lap history: 130 laps - Log history: 300 hours - Heart rate zones: 7 zones - Operating Temperature: -10C° ~ 50C° In the Box: - Rider 450 - Bike Mount - USB Cable - Quick-Start Guide
Bontrager Blendr Circuit MIPS Bike Helmet Mount Rear
$19.99
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
Bontrager Blendr Garmin High Mount
$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin High Mount for a clean, flush look that securely holds your Garmin centered over the stem. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Bontrager Blendr Universal Ion Mount
$19.99
Light up the road Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. - Blendr is an elegant, integrated accessory mounting solution - Clip can be rotated for compatibility with many Bontrager accessories - Works with any Blendr-compatible stem and the accompanying base
Bontrager GOtime
$39.99
Keep an eye on your speed, distance and more with wireless ease when Bontrager's GOTime cycling computer is clipped to your bars. Set-up is a breeze; the large LCD screen is easy to read and the integrated clip mount allows you to instantly remove the computer and throw it in your pocket when you reach your destination.
BiKASE ElastoKASE
$29.99
Are you looking for an incredibly simple way to mount your phone to your bicycle? Do you want that case to have a plethora of mounting options and accessories? Well... look no further than the ElastoKASE from BiKASE. Utilizing the 1/8 turn connection of the GoKASE and the simplicity of a rubber lined, gripping shock cord, the ElastoKASE is your "go to" phone or anything case. • Phone holder for 6-inch phones and smaller • Works with GoKASE attachments and brackets • Material: TPE & Shock Cord
BiKASE Mini iKASE
$29.99
BiKASE's Mini iKASE is ideal for mounting smaller tablets on the handlebars of your bicycle and exercise bikes (letting you listen to music or movies, read books, catch up on email and check the news and social media). It has a protective clear covering that keeps the sweat off your tablet while allowing full functionality. It quickly and securely straps on, and the strap is removable for using the iKASE off the bike, too. • Material: Urethane • Fits tablets up to 8 x 5.5-inches • Fits iPad Mini and smaller • Strap/Velcro Mounting • Side rollup opening • Removable mounting strap • Clear on back where camera is located
Zipp QuickView Road Low Computer Mount
$22.00
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt
Zipp QuickView TT Computer Mount
$22.00
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
Zipp Vuka Shift AXS Computer Mount
$31.00
Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS
XLAB Aero Computer Mount Gen 2
$15.95
With aerobars, short stems and hydration systems crowding the front end of your bike, it's hard to mount a computer. But, with Xlab's Aero Computer Mount Gen 2 you can mount your computer to your stem cap! It's aero because it fits neatly behind aero drink systems and horizontally mounted bottles, and the extra height of the mount makes your computer easier to read. It can also be mounted on the Xlab Torpedo Mini Mount, placing your computer in front in your line of sight. • The Aero Computer Mount, re-designed! Aerodynamically designed and longer to support larger screen computers • Mount in front of Torpedo Systems or on stem bolt • Helps reduce drag from a computer mount with one that was designed with aerodynamics in mind • Mount in front of TORPEDO SYSTEM (sold separately) for optimum viewing. • Mount on stem when using non-XLAB drink systems (sold separately) • Easy to read when in aero position • Fits most computers including the new longer form factor models (sold separately) • Mount is 37 mm wide. Plenty of room to support the popular Garmin computers (sold separately) • Includes hardware and instructions • Weight: 29.5 grams
XLAB Space Saver Computer Mount
$16.95
• When aerobar space is tight, place your computer on top • Tuck straw on either side for best aerodynamics • Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately) • Compatible with most computers, including large screens (sold separately) • Glass-reinforced nylon • Weight: 18.5 grams
XLAB Versa Computer Mount
$32.95
Telescoping Garmin Computer Mount for Versa Plates. Raise the computer up for Refill Bottles, or lower it down to clear Standard Bottles. On-the-go tilt adjust to avoid glare. - Telescoping computer mount makes for a seamless switch between Refill or Standard Bottle - Compatible with Garmin bike computers and Multisport Watches - Requires Versa Carbon Mount or Versa Aluminum Mount Telescoping Garmin-Specific Computer Mount - Raise the computer mount up to tuck in a Refill Bottle for race day, or seamlessly lower it down for a Standard Bottle to maintain the optimal view for training days. Compatible with Garmin bike computers and multisport watches. On-the-Go Computer Tilt Adjust - Avoid changing glare with a tilt mechanism for easy adjustments while you ride Arrives Fully Assembled - Few steps required to install and head out on your first ride - Weight: 1.9oz (54g) - Construction: Nylon Composite Includes - Fully assembled computer mount - 2 screw sets: one for Versa Carbon Plates, and one for Versa Aluminum Plates Warranty: Limited Lifetime
Topeak Omni RideCase
$39.95
The name says it all… It holds tight and works with almost every smartphone having a 4.5” to 5.5” screen with or without a case. High quality, ultra-elastic silicone grippers tenaciously hold your phone for convenient display. The included strap mount rotates for portrait or landscape orientation. The Omni RideCase is compatible with other RideCase QuickClick mounts, like the RideCase CarMount or RideCase Armband. - Material: Ultra-elastic silicone/engineering grade plastic - Added Features: Angle adjustable Rotates for landscape or portrait viewing Included mount compatible with Topeak RideCase & PanoComp X - Mount: Included strap mount for installation on handlebar or stem - Weight: 26 grams (Case) - Size: 13.1 x 6.9 x 1.7 cm / 5.2” x 2.7” x 0.7” (Case)
Topeak Omni RideCase DX
$54.95
The DX version of the Omni RideCase holds tight and works with almost every smartphone having a 4.5” to 5.5” screen, with or without a case. High quality, ultra-elastic silicone grippers tenaciously hold your phone for convenient display. The included RideCase Mount rotates for portrait or landscape orientation. The Omni RideCase is compatible with other RideCase QuickClick mounts, like the RideCase CarMount or RideCase Armband. - Material: Ultra-elastic silicone/engineering grade plastic - Added Features: Angle adjustable Rotates for landscape or portrait viewing - Included mounts compatible with Topeak RideCase & PanoComp X - Mount: Included mounts for installation on handlebar, stem or stem cap - Weight: 26 grams - Size: 13.1 x 6.9 x 1.7 cm / 5.2” x 2.7” x 0.7” (Case)
Topeak RideCase
$59.95
The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Includes mounts for installation on handlebar, stem, or stem cap
Topeak Ridecase
$59.95
The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Includes mounts for installation on handlebar, stem, or stem cap - Size: 15.7 x 8.2 x 1.5cm / 6.2" x 3.2" x 0.59" - Weight: 35g / 1.23oz - Added Features: Integrated flipstand for landscape or portrait viewing angle adjustable rotates for landscape or portrait viewing
Topeak Ridecase
$59.95
Works with iPhone SE(2nd Gen) / 8 / 7 The RideCase for iPhone has a scratch-resistant, dual density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Mount: Included mounts for installation on handlebar, stem, or stem cap - Size: 14.4 x 7.3 x 1.4cm / 5.7" x 2.9" x 0.55" - Weight: 41.6g / 1.47oz - Added Features: Integrated flipstand for landscape or portrait viewing - Compatibility: Works with iPhone SE 2nd gen/8/7/6/6s
Topeak UTF Multi-Mount
$37.95
Up-To-Front Multi-Mount aligns everything to be mounted front and center for viewing convenience and to easily capture those precious ride moments, track your ride, and illuminate your way home from your adventure. Includes adapters for mounting GoPro/Shimano Sport Cameras, Garmin Edge/Wahoo/Sigma GPS cycle computers, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800BT, and other GoPro-mount-compatible devices. Flipflop mounts can be positioned to customize device viewing height so you can be focused and enjoy your ride! - Material: Forged aluminum / Engineering grade polymer - Modular Multi-Mount: Adapters included for GoPro / Shimano Sport Cameras, Garmin Edge / Wahoo / Sigma - Device: GPS cycle computers, Topeak CubiCubi front lights, WhiteLite 800 BT, and WhiteLite HP 500 - Bracket: Fits 25.4 – 31.8mm handlebars (shims included) - Max Load: 480g / 16.93oz - Added Features: Angle adjustment (Sport Camera), Rotates for landscape or portrait viewing (RideCase) - Weight: 52g / 1.83oz - Size: 12.5 x 6.6 x 4.3cm / 4.9" x 2.6" x 1.7"
Topeak UTF Multi-Mount for Integrated Handlebars
$32.95
An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)
Sigma Sport BC 16.16 STS
$69.99
The BC 16.16 STS comes with an STS speed transmitter. It provides crucial information for avid cyclists and commuters! The new ETA function continuously calculates how much time and distance remains until you reach your destination. Plus, every mile ridden is converted into fuel savings! Using NFC technology and the free SIGMA LINK app the BC 16.16 STS can communicate with Android smartphones to program and download ride data. Bike functions: - Speed - Average speed - Comparison of current/avg. speed - Maximum speed - Trip distance - Total distance (Bike 1 & Bike 2) - Ride time - Total trip time (Bike 1 & Bike 2) - Clock (12/24h) - ETA display (time/timer/distance) - Current temperature - Daily fuel savings - Total fuel savings - Cadence functions (w/ STS cadence option): - Current cadence - Average cadence Features: - NFC communication w/Android smartphone via SIGMA link - Full test display with 7 available languages - Predefined tire sizes - 2 adjustable wheel sizes - Ride time up to 100 h - Automatic start/stop w/ motion sensor - Back-up function via memory chip - Battery status display (receiver & transmitter) - Workout statistics for 12 months - Automatic bike recognition - Backlight - Watertight in accordance with IPX8 - Tool-free mounting
Page 1 of 8 Next page