Cranksets

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 5-bolt outer and inner road oval, 130 BCD 5-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 5

• Square taper interface • Only includes left crank

• Square taper interface • Only includes left crank • 175mm length

- Horizontal square interface - Only includes left crank

- Forged steel - 24 TPI

• Forged steel • 6 1/2-inch • Compatible with 9/16" pedals • Left crank • Drilled for 9.5mm cotter pins

- Material: Heat-treated 4130 Chromoly - Splines: 8 - Diameter: 19mm - Length: 5.7/8" (150mm) - Spindle Bolts: 8x1mm (Included) - Compatibility: Fits Stolen OEM/MOB/SIC Mission Transit, Rant 8-S, Sunday Saker and most other 19mm, 8 spline cranks

Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height

These spiders are optimized to fit Cane Creek's eeWings All-Road cranks, adding more versatility for riders. The spiders will allow direct-mount cranks, such as the eeWings, to accommodate 110 BCD chainring so riders can expand their gearing options. - Allows riders to run 2x drivetrain configurations with a smaller 32T chainring - CNC high grade 7075 series aluminum - Anodized titanium-gray finish

The Cane Creek eeWings All-Road titanium crankset offers superior stiffness, durability, and weight savings. This slimmer crank is specifically designed to take on road, gravel, and cyclocross configurations. - 20%-30% more stiff than premium carbon cranks, while remaining in the same weight range - Includes CNC machined aluminum bottom bracket preload adjustment ring - 30mm spindle is compatible with the following bottom brackets: BSA68mm, PF86, BB30 (External Bearing Only), PF30 (External Bearing Only), and 386EVO - 160mm Q-Factor - Backed with a 10-year limited warranty - eeWings Tie-Dye cranks are made from the same high-grade titanium as the standard eeWings cranks and are hand-finished in a blue to purple tie-dye color giving each crank a unique character - Changes and wear to the color are expected as the cranks are ridden and will not be covered by the warranty - An optional clear adhesive surface protector will be included in the box to help ensure that the finish lasts over the course of regular use Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 135/142 Road Disc Hubs > 415mm Chainstay, 135/142 Road Disc Hubs < 415mm Chainstay - Crank Intended Use: Road, Gravel, Cyclocross - Pedal Spindle: 9/16" - Spindle Interface Type: BB30/PF30 , 386 EVO , RaceFace/Easton CINCH - Chainring BCD: Direct Mount SRAM - Weight: 395 - BB Included: No

- Service parts for E-13 chainguides

- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs - Kits include chainline adjustment spacers - 8/12mm button head bolts for single ring steel backplate guide applications - 10/16mm flat head bolts for single ring alloy backplate guide applications

- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets

e*thirteen's TRS Race carbon crankset is crafted from lightweight components, so you can hit the trails at full speed. - Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings - Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance - Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation - The adjustable chainline accommodates non-Boost (142mm), Boost (148mm), and Super Boost (157mm) - Compatible with e*thirteen's SL Guiderings (28-38t options for non-Boost and Boost frames) and UL Guiderings (30-42t options for Super Boost frames) - Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92 - Number of Chainrings: No Rings Included - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: e*Thirteen P3 Connect - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount e*Thirteen - BB Included: No

The e*thirteen XCX Race crankset offers ultra-lightweight construction and uncompromising strength. - Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings - Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance - Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92 - Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation - Designed to be used with e*thirteen's ultra-lightweight UL Guidering (30-42t) for optimal weight savings - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 135/142 MTB Hubs , 141/148 Boost Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: e*Thirteen P3 Connect - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount e*Thirteen - BB Included: No

The e*thirteen e*spec Plus Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These alloy crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront. - An 8mm self-extractor bolt is built into both arms for easy removal - 6061 Aluminum - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Designed for ebike: Yes - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount Bosch - BB Included: No

The e*thirteen e*spec Race Carbon Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These carbon crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront. - An 8mm self extractor bolt is built into both arms for easy removal - World-Cup DH-rated layup and construction - Compacted carbon fiber with an additional 3k added to front and rear faces of crank for impact resistance - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Designed for ebike: Yes - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount Bosch - BB Included: No

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 4

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 5

The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms. - Designed to fit Shimano Dura-Ace 9000 cranks - Includes 4 T30 Torx bolts and 4 bolt covers - Not compatible with absoluteBLACK Sub Compact oval chainrings

The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms. - Designed to fit Dura-Ace 9100 cranks - Includes 4 T30 Torx bolts and 4 bolt covers - Not compatible with absoluteBLACK Sub Compact oval chainrings

The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms. - Designed to fit Shimano Ultegra 6800 cranks - Includes 4 T30 Torx bolts and 4 bolt covers - Not compatible with absoluteBLACK Sub Compact oval chainrings

The Taco Bashguard is designed to protect your chainring from obstacles like logs or rocks. It is hidden behind the crank and mounted to ISCG05 tabs that are located around your bottom bracket. It offers great protection for both oval and round chainrings, especially direct mount rings that cannot mount to a standard 4-bolt bashring. The Taco Bashguard fits up to a 32T oval chainring or 34T round one. - The Taco Bashguard can be used with any chainring from 26T-32T oval or 26T-34T round - Box includes taco bashguard (assembled), 6 x 1mm spacers, 3 x 3mm spacers, 3x 16mm stainless bolts, and 1 x 12mm stainless bolt - Weight: 56g

- Bash guard protects chainring from logs, rocks and other trail hazards - Designed and manufactured in the USA from 7075-T6 aluminum alloy - See wolftoothcycling.com for mounting tips - 51g (26-30t)

Protect your 1x investment with this bashguard designed for Shimano Symmetrical 96 BCD cranksets. - Only compatible with symmetrical 96 BCD cranks - Made from aluminum alloy

The Wolf Tooth CAMO BashSpider is a crankset-mounted boost bash ring. This is a spider with an integrated bash ring for use with direct mount cranksets. The CAMO BashSpider pairs with a CAMO chainring to complete the CAMO System. - A CAMO chainring is required to complete this system - The "rolling" ability of the BashSpider allows the rider to move easily over obstacles - Bash rings that are mounted on the crankset are better supported than bash rings that are mounted to the frame or bottom bracket - M5 (minus 5mm - Boost) is dished towards the frame for 52mm chainline for bikes with Boost spacing - Will fit CAMO chainrings from sizes 28T-34T round or 30T-32T elliptical - Includes mounting bolts - Designed to work with the Race Face Cinch cranksets that have a removable spider

The Wolf Tooth CAMO BashSpider is a crankset-mounted boost bash ring. This is a spider with an integrated bash ring for use with direct mount cranksets. The CAMO BashSpider pairs with a CAMO chainring to complete the CAMO System. - A CAMO chainring is required to complete this system - The "rolling" ability of the BashSpider allows the rider to move easily over obstacles - Bash rings that are mounted on the crankset are better supported than bash rings that are mounted to the frame or bottom bracket - M5 (minus 5mm - Boost) is dished towards the frame for 52mm chainline for bikes with Boost spacing - Will fit CAMO chainrings from sizes 28T-34T round or 30T-32T elliptical - Includes mounting bolts - Designed to work with SRAM cranksets that have a removable spider

The Wolf Tooth CAMO BashSpider is a crankset-mounted boost bash ring. This is a spider with an integrated bash ring for use with direct mount cranksets. The CAMO BashSpider pairs with a CAMO chainring to complete the CAMO System. - A CAMO chainring is required to complete this system - The "rolling" ability of the BashSpider allows the rider to move easily over obstacles - Bash rings that are mounted on the crankset are better supported than bash rings that are mounted to the frame or bottom bracket - M5 (minus 5mm - Boost) is dished towards the frame for 52mm chainline for bikes with Boost spacing - Will fit CAMO chainrings from sizes 28T-34T round or 30T-32T elliptical - Includes mounting bolts - Designed to work with Shimano cranksets that have a removable spider

CAMO Spider - Made from Aluminum alloy for light weight - Includes 5 black chainring bolts

Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank