• MTB or Road • 1.5 x 2667mm • Galvanized
- Fits cantilever brakes - Sold individually
- Complete cable kits for internal three speed hubs
Origin-8's Braze-On Cable Stop with adjuster allows you to convert to STI style shifters. They mount onto down tube Braze-on bosses and are machined alloy with an anodized finish. The lightweight design lets you make the conversion without adding too much extra weight. One pair per package.
Origin-8's Seat Binder Cable hanger provides optimal cantilever brake cable routing. It mounts to most seat binder bolts and allows you to run a rear cantilever brake on your cross or touring bike even without a stock cable stop. • Mounts to most seat binder bolts • Aluminum construction • Great for cantilever brake
Kink's One Piece Cable system incorporates all the great features found in the DX linear cable and creates a simpler brake cable system requiring minimal setup. The three preset straddle cable lengths fit with all modern frames, and the remaining straddle cable length can easily be trimmed off. This single unit cable system greatly simplifies brake installation, reduces maintenance, and increases braking stiffness. Note: The One Piece Cable system requires a slotted cable guide and cable stop and works best with modern frames using a 245mm cable stop-to-mount distance. Tech Specs - Housing: Coated linear strand - Wire: 1.5mm Pre-stretched slick wire - Length: 50" - Lug: Two-piece bind-free brass - Fits: Frames with 245mm cable stop distance - Weight: 3.0oz
Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10
Mountain Pro kits offer both enhanced performance and style. But unlike Road Pro Kits, shift and brake systems are sold separately. Teflon-coated cables used with our Slick-Lube liners dramatically reduce friction while compressionless shift housing delivers smooth, precise shifting performance. And, with all the needed parts included, our Mountain Pro kits are easy to install. - Teflon-coated cables, Slick-Lube liners, and compressionless housing enhance performance - Designed to keep gunk out - enough housing for continuous runs, including seal liners if a bike has stops - A step above standard OEM cables and housing - Mountain Pro Shift kits are available in colors that match Jagwire Mountain Pro hydraulic hose kits What's Included: 1 3200mm LEX-SL Shift Housing 1 1500mm Teflon-Coated Front Shift Inner Cable 1 2300mm Teflon-Coated Rear Shift Inner Cable 3 Sealed Alloy End Caps 6 Lined Alloy End Caps 2 Hooded Alloy End Caps 2 Cable Tips 2 4G Tube Tops 6 Cable Donuts 2 Rotating Hooks 1 2100mm Sealing Liner
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes
$64.99 - $69.99
Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.
$4.99 - $13.49
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation
$5.49 - $13.49
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
$4.99 - $10.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
Jagwire's Universal Pro End Cap Packs contain a complete selection of aluminum housing ferrules and cable end caps (crimps) so that you can properly setup your cables and housing sections and prevent fraying cables. They come in 6 colors for customizing your ride, too. - 4mm for use with solid color shift housing - 4.5mm for use with braided shift housing Each kit includes: - Ten shift housing sealed end caps (ferrules) - Six 5mm brake housing open end caps (ferrules) - Four cable caps (crimps)
Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar
- Precision-machined cable ferrules for improved braking and shifting performance. - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables - 5mm ID for use with most braking cables - 50-count bottle
- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease
Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1
Shimano Stainless Road/MTB Brake Cable & Housing Sets - 1 x 2000mm black 5mm housing - 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables - 2 end caps and 2 cable crimps
These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1
- Wet or muddy condition cable sealing solution - 4/6mm
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut
SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
SRAM's Inline Barrel Adjusters are placed on your brake cables near the handlebars so that you can turn the adjusters to fine-tune your braking. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.
Replacement line kit for SRAM and Avid hydraulic disc brakes. - For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1) - 2000mm, black
SRAM's Rim Brake Hydraulic Line Kit is a replacement hose kit for all road hydraulic rim brakes. - Compatible with SRAM road hydraulic rim brakes - Length: 2000mm
Page 1 of 5 Next page