Accessories

Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

A simple rear bike light for after dark. The Flare R Metro is a simple USB rechargeable rear bike light that can help cyclists be seen after dark. The versatile design and included bike mount make for easy, tool-free attachment to any bicycle. Remove the included mount to reveal a built-in clip that securely attaches to a rider's belt clip, pocket, or bag. Details: - A versatile USB rechargeable rear bike light designed to help riders stand out after dark. - 20 Lumens help make riders more visible after dark - Triple LED design can be seen from a wide visibility angle - Versatile design can be mounted on a bike, belt, or bag - Two steady modes and one flash mode - Low steady 8L-3 hrs, high steady 20L-1.5hrs, Flash 20L-6 hrs - Includes Flare R Metro, Clip Connect Mount, and Micro USB charging cable - Integrated clip for secure installation on belt or bag, simply remove the mount to access - Clip connect mount with 16-degree offset compensates for seatpost angle

A versatile USB rechargeable bike light set designed to help riders stand out after dark. Simple bike lights for after-dark The Ion 50 R / Flare R Metro Bike Light Set is a simple USB rechargeable front and rear cycling light set that can help you be seen after dark. The versatile design and included bike mount make for easy, tool-free attachment to any bike. Remove the included mount to reveal a built in clip that securely attaches to a belt clip, pocket, or bag. Product details: - 50 Lumens front and 20 Lumens rear help make riders more visible after dark - Triple LED design can be seen from a wide visibility angle - Versatile design can be mounted on bike, belt, or bag - Each light has two steady modes and one flash mode - Ion 50 R - Low steady 20L-3hrs, high steady 20L-1.5hrs, Flash 50L-6 hrs - Flare R Metro - Low steady 8L-3 hrs, high steady 20L-1.5hrs, Flash 20L-6 hrs - Includes Ion 50 R, Flare R Metro, Clip Connect Mounts, and Micro USB cable - Integrated clip for secure install on belt or bag, simply remove mount to access Features Clip Connect mount The intuitive soft mount attaches quickly and easily to a bike’s handlebars or seatpost. Integrated belt clip Remove the included Clip Connect mount to access the integrated belt clip for easy mounting on belts, bags, and straps. Stand out after dark The Flare R Metro and Ion 50 R are lightweight and simple lights designed to help riders be more visible after dark. USB rechargeable Micro-USB lights that fully charge in 3 hours. By replacing single-use batteries, these lights can help save up to 350,000 disposable batteries.

Accessorize your ride. Keep yourself dry. Genuine Replacement Parts No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. - Original equipment replacement fenders for Trek Powerfly - Mounting hardware sold separately - Front fenders are designed for SR Suntour suspension fork mounts, other forks may be incompatible - Front fenders are shared with Powerfly FS 2021 equipped models - Front fenders include struts - Rear fenders do not include struts as they require Powerfly HT specific rear rack for assembly Fender, rack and kickstand compatibility - Use the compatibility guide to match the right parts with your bike and simplify installation of your new accessories.

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender as well as a spring-loaded bar to hold down your belongings.

Reach peak inflation pressure in a flash with Topeak's Peak DX II. Its butted-aluminum barrel and folding T-handle makes pumping up tires a snap! Plus, the thumb-lock SmartHead grips tight on both Presta and Schrader valves.

Thule Sleek Bassinet transforms your Thule Sleek into a pram, and can convert it from single to double stroller as your family grows. - Spacious and comfortable bassinet, with ventilated mattress - Can convert your Thule Sleek into a double stroller - Ventilated canopy with extendable sun visor gives your child a pleasant ride in any weather and provides UV protection (UPF 50+) - For infants aged 0–6 months

The Surly Dugout Bag is a great cargo solution for securely attaching compact items or bottles to your bike’s handlebar and frame. Engineered with one-handed operation in mind, interior cargo, and exterior pockets are easily accessible and made of bluesign® approved fabric and lining for best sustainable practices. The Dugout bag mounts onto any size frame with four connection points and carries up to three pounds of cargo or one 1-liter beverage. It also comes with a Surly Whip Lash Gear Strap for enhanced stability when riding rugged trails.  The Surly Dugout Bag is a great cargo solution for securely attaching compact items or bottles to your bike’s handlebar and frame. Engineered with one-handed operation in mind, interior cargo, and exterior pockets are easily accessible and made of bluesign® approved fabric and lining for best sustainable practices. The Dugout bag mounts onto any size frame with four connection points and carries up to three pounds of cargo or one 1-liter beverage. It also comes with a Surly Whip Lash Gear Strap for enhanced stability when riding rugged trails.  - Mounts using four connection points to provide stability on rougher trails  - Adjustable fit allows for compatibility on all bike frame sizes - Securely carries up to 3 lbs of cargo and up to 1-liter bottles  - Exterior pockets hold extra cargo space for snacks, tools, and more - Manufactured with bluesign® materials for lessened environmental impact  - Can be accessed with one hand for ease of use

Further personalize your unique Surly bike with one of four Surly Make It Your Own Decal Sets, featuring alternative fonts and designs for the discerning rider. Stickers may also be affixed to helmets, mini fridges, dog food bowls, and more. - Decals are available in black or white - Each set includes decals for the down tube, chainstays, and fork blades, a Surly Make It -your Own seat tube icon, Surly headbadge, and a ’Natch frame sticker - Dry-transfer style

Suitable as a tourniquet or stylish headband in a pinch, the Whip Lash's primary function is to help you attach whatever needs attaching to your bicycle frame. Available in a multi-pack that includes two 550mm lashes and one 695mm lash, the Whip Lash's potential is limited only by your imagination. You could use one to strap your beverage to the down tube when the trail says you ought to keep your hands on the bars. Or you could use another to fix your fishing gear to the top tube when rack space is maxed out. Whatever you get into on or off the bike, they're handy to have around because they're light, compact, and easy to use. Rubberized on one side to keep your stuff from slipping around, the Whip Lash's trimmable design features nylon construction and a simple hook-and-loop style closure.

• Self locking rear mount design • Fully adjustable length for 26" to 29" wheels • Alloy construction

Sunlite's Alloy Springer Rack is the perfect tool to allow commuters and tourers to carry extra gear. It's made of tough, light tubular aluminum, fits most bikes, and has a capacity of up to 50 pounds. And the spring-loaded bar helps hold your stuff securely.

- Heavy duty cable lock with a scratch-free outer housing - 6 feet in length, enough to secure wheel and frame - Includes two keys - Bracket: Included

- Single super bright LED safety light combo set - USB rechargeable - cable included - Low battery indicator - Short 2.5-3 hour charge time with indicator light - Quick and easy to use silicone band attachment - 2 modes per light - Steady and flash

Traveling light? Go with Sunlite's Gold Tec Lite Rack. Made from lightweight tubular aluminum, the Gold Tec Lite is durable enough for daily commutes, tough enough for cross-country trips and doesn't weigh you down. The top deck has a capacity of up to 45 pounds and side struts support fully loaded panniers. Plus, it fits both road and mountain bikes.

Sunlite's Gold Tech Adjustable Rack is the perfect tool to allow commuters and tourers to carry extra gear. It's made of tough, light tubular aluminum, adjusts to fit 26-inch and 700c-wheeled bikes, and has a carrying capacity of up to 30 pounds.

Turn your bike into an errand-running, cargo-hauling machine with Sunlite's Standard Lift-Off Basket. This sturdy basket attaches to your bike in a snap via handlebar mounts. It carries all your day's booty and the rubber-coated carry handle lets you bring your basket along when you're off the bike! - Dimensions: 13.5 x 10 x 9.5 inches

Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill

Spurcycle Compact Bell Materials: composite nylon with brass alloy Dome Finish: Black Dome size: ?30mm x 20.5mm Weight: 28g Origin: Made in Taiwan, Guaranteed for Life Install: fits 22.2mm ONLY (3mm hex tool required.) A new bell built to Spurcycle standards using 30% fewer parts and a singletrack focus. Lighter and more compact, it's the perfect bell for your mountain bike or flat-bar commuter. MORE GOOD VIBES Engineered for the same lasting Spurcycle sound. Ring early and roll through with path-clearing resonance. PINT-SIZED PUNCH Half the mount width. New compact form fits easily between handlebar components NICE & SIMPLE Fixed 22.2mm mount—no drop bars—made of composite nylon. Fewer parts mean lower cost, easy install, and simple crash repairs.

Spurcycle Original Bell Materials: stainless steel with brass alloy Dome and aluminum Hammer Finish: Raw or Black DLC Dome size: ?30mm x 20.5mm Weight: 45g Origin: Made in USA, Guaranteed for Life Install: 22.2-31.8mm (2.5mm hex tool required.) Spurcycle bells create powerful, enduring sound. Give notice well in advance with a loud, convincing tone. Precision built in the USA for a lifetime of way clearing.

The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.

Sporty, chic, and practical. The Traveller bicycle bag is made of water-repellent fabric that unites design and function. The bags were designed especially for trekking and city bikes, and offer ample space for keys, money, and personal items. Reflective elements, like the SKS logo, add safety. Stylish bag also features laminated zipper with ergonomic easy-zip, secure inside pocket, and an orange lining to make finding items easier. - Toptube bag with storage compartments - Durable rubberized hook and loop fastener - EASYZIP - Water-repellent - Reflective

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously

With a dazzlingly bright 28 LED PB Power Array and three modes, this USB rechargeable light is like a Scarlet Begonia for the back of your bike. For added safety, it has a CPSC certified reflector in the lens to keep you visible when the light is off. Versatile mounting options allow you to attach it to your seat post or rear rack with the included brackets. - PB 28 LED power array and CPSC certified reflector provides steady, Courtesy & Superflash modes - FL1 Tested - Run times: 5 hrs (steady – 20 lm), 9 hrs (Courtesy – 6-18 lm) and up to 30 hrs (Superflash - 20 lm) - Provide 160-degrees of visibility - Highly visible, even in daylight - Dust and water resistance rated to IP65 standard - 700 mAh lithium polymer battery charges in 2.5 hours with micro USB cable (included) - Includes rear rack and seat post mounts plus clip mount for multiple mounting options - 65 grams

Turn your mountain bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.

- Made from heat-treated tool steel to ensure the ultimate in strength and lasting performance. - Ergonomic, cushioned grip, and high leverage design for comfort and ease of use. - Quickly and cleanly cuts brake and derailleur cables, housing, and other wires. Cable cutters are an essential tool used for some of the most fundamental elements on the bicycle. What seems like a simple tool can often be the root of frustration when poor cut quality ruins a brand new cable, crimps housing shut, or leaves strands uncut. The Pedro's Cable Cutter is an industry favorite and when put to the test against the competition and you will quickly see why. Our cable cutter is designed for years of service, for comfortable and easy usage, and with extra jaw overlap ensuring a clean cut every time. The Cable Cutter is designed for cutting steel cables (wire rope) up to 4mm in diameter. Backed by Pedro's lifetime warranty.

The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.

Precision CNC machined aluminum tool for the installation and removal of 12-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8" drive. - 46mm 12-notch OD cup - Race Face® Cinch™, Rotor® BSA30, Zipp® Vuma™, Hawk Racing™ BB3086™, and more

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent

A fast and convenient tool to remove and install 12-spline Shimano/SRAM style cassette lockrings, as well as similar lockrings on rotor discs. The FR-5H features a modified FR-5 tool that allows use without removing most quick release skewer nuts. The removable, threaded steel handle makes it possible to replace a worn or damaged head. - Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockrings - Also fits some Shimano disc brake lockrings

The Park FR-6 Freewheel Remover fits most 4-notch BMX and singlespeed freewheels. It can be held with a wrench or vise and its narrow profile allows use without removal of cones and locknuts.

Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.

The MTC-40 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along. - 2.5, 3, 4, 5, 6 and 8mm hex wrenches - T25 & T30 Torx compatible driver - Combo cross/straight tip screwdriver - 5- to 12-speed compatible chain tool* - Rotor straightener - CO2 cartridge inflator adaptor - Bottle opener - Key ring holder - Weight: 217g (7.65 ounces) *The MTC-40 chain tool will not peen Campagnolo 11-speed chain rivets (see CT-4.3 or CT-6.3)

Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

The MT-10, 20, 30 and 40 are high quality folding take-along tools that feature forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation.

Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.

Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver. - Works on 5- to 12-speed road and mountain bike cassettes and freewheels - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel / Cassette Lockring Tools - Features hardened pins to keep the chain in place

Designed and built especially for singlespeed bikes, Park's SS-15 Single Speed Spanner is a durable forged-steel tool with a 15mm socket wrench for axle nuts, 15mm open-end wrench for pedals, a tire lever, and a bottle opener. It's just the right size to take along on rides and is great for wrenching in your shop too.

The Lucky Cat Cage is made from a single sheet of lightweight 5052 alloy. Cut in the shape of a Maneki-neko (Japanese for "beckoning cat"), this Portland Design Works bottle cage will undoubtedly bring good luck to its owner. Its side loading design makes it a great fit on small bike frames.

The Portland Design Works Sparrow Cage is made from a single sheet of lightweight 5052 alloy. The Sparrow's wings fold in to securely cradle your water bottle and the cut outs help keep the cage light. Get a Sparrow and make your ride fly. - Constructed of 5052 alloy - Includes two stainless bolts for installation  - Weight: 57g (2oz) - Lifetime PDWarranty

The shape of the white VGD Cage was inspired by the legendary brandy toting St. Bernard rescue dogs of the Swiss Alps. The black VGD was designed to represent another type of rescue dog: the everyday Black Lab mix who's waiting to steal your heart and be adopted at the local shelter. - PDW donates 10% of profits from the Very Good Dog (VGD) Cage to animal advocacy organizations that help very good dogs in need.

Osprey’s Hydraulics LT 1.5L Reservoir by Hydrapak is made for light and fast activities where weight and balance are critical. Twin-welded chevron baffles stabilize the water and maintain a flat profile. The streamlined design allows for easy loading into internal hydration sleeves. Thoughtful design makes filling, cleaning, and most importantly, staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.

Osprey’s Hydraulics LT 2.5L Reservoir by Hydrapak is made for light and fast activities where weight and balance are critical. Twin-welded chevron baffles stabilize the water and maintain a flat profile. The streamlined design allows for easy loading into internal hydration sleeves. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.

Many e-bike owners are well-acquainted with this problem: bags and baskets that can't be attached to the handlebar because the e-bike display is in the middle of the handlebar. The ORTLIEB E-Bike Mounting Set comes to your assistance without forcing you to relocate the display. The lockable adapter is mounted to the handlebars with the proven cable fastener. This gives you a theft-proof way of attaching your ORTLIEB handlebar bags and baskets despite the display. The fastener is made for attachments of up to 5 kg. - suitable for all handlebar diameters up to 35 mm - duplicate set of keys - mount compatible with products by Rixen&Kaul (KLICKfix System) - bags can be locked to the handlebar with the integrated lock - additional safety in traffic thanks to the reflective material on the mount block

Minimalism to the max is a good description of the ultra-lightweight seat pack for road bikes and mountain bikes. The Micro Two was specially designed for those demanding tours when every gram counts. In addition to being 100% waterproof, the pack offers you space enough for a few critical items such as a replacement tube, a bike kit, or first aid materials. Its roll closure and elastic drawstrings allow you to collapse its size down to a minimum. And thanks to its extremely small dimensions, it can be mounted to your bike in an extremely space-saving manner. Simply attach the mounting bracket to your seat stays. Then attach or detach the pack with a single hand using the snap buckle. While the snap-on system was again enhanced for user-friendliness, the Micro Two remains compatible with all previous models. Further Features: - PVC-free, polyurethane-coated nylon fabric - No protruding plastic parts on the inside - Includes the mounting bracket - Simple attachment - Reflector

Following the motto “less is more“, the super lightweight saddlebag transports everything you need to take along your road bike or mountain bike. The handy roll closure with elastics ensures tight and waterproof storage of your gear. Super small dimensions allow mounting to your bike requiring very little space. Two metric screws permit easy mounting to the saddle rails. With the click and snap closure the saddle bag can be taken off with just one hand. A strong reflector provides safety in dusk and at night. Micro Two is PVC-free and sustainably produced in Germany. OPTIONAL ACCESSORY (each sold separately) - Seat mounting for saddlebag (article code E97) - strap system (article code F96 E) for fixing to comfort or spring saddles

The Muc-Off Inflator kits help riders quickly inflate their tires and quickly get back to riding in no time. Each kit contains 2x cartridges, 1x compact and durable CNC-machined inflator head with soft-touch press down button which easily controls CO2 release. Dual head nozzle compatible with Presta and Schrader valves and 1x neoprene sleeve to help avoid freeze burn. - Push design to easily control CO2 release - Stainless steel internal pin - Dual head nozzle, compatible with both Presta & Schrader valves - Compatible with most threaded 16g & 25g CO2 Cartridges - Two cartridges included

- Fast and effective grease-cutting formula - Removes all chain oil and wax residue - Safely eliminates drive chain contaminants - Biodegradable - Ideal for use with chain cleaning devices - Trigger spray included for easy application on cassettes, chainrings and derailleurs - Safe for metal, plastic, rubber and seals

The LTD Mirrycle Mirror quickly attaches to Bontrager Isozone handlebars using the supplied wrench. It has a convex mirror for a wide field of view to help you clearly see approaching traffic. And the mirror easily adjusts to your optimum viewing angle.

Carry just the essential roadside/trailside tools with the MSW Tool Hugger. Sleeves are designed to fit tire levers, CO2, inflator, patch kit, multi-tool, and a tube (all sold separately). Works well standard saddle rails, or just toss it into a jersey pocket. - Durable Cordura outer layer - Seven elastic tool compartments - Hook and loop closures

- Light guide for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Compact size - Bracket with flexible mounting option - .06 LUX - 5 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 20 hrs

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.

The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

Real endurance fuel - Rock-solid sustained energy - No sugar crash - Easy to digest, no GI distress BENEFITS: Unlike other similar-looking products on the market, Hammer Gel’s complex carbohydrates, all-natural ingredients, and pH-balancing formula are easily digestible, and provide quick-acting yet long-lasting energy in a convenient, tasty, concentrated form. The addition of branched-chain amino acids helps to prevent muscle tissue breakdown while reducing fatigue. - Hammer Flask holds 5-6 servings. FREE flask with purchase of Hammer Gel jug! - Only Espresso and Tropical flavors contain caffeine, 50 mg for Espresso and 25 mg for Tropical per serving. - All Hammer Gel flavors are vegan except Nocciola. - Kosher Certification